Network connection - Apple

• CSU wireless network connection procedure - PC
• CSU wireless network connection procedure - Apple
• NEW!! CSU wireless network connection procedure - CougarWave Open
• CSU wireless FAQ's
• CSU wireless network policy

Supported operating systems

• OS X 10.3 (Panther)
• OS X 10.4.2 (Tiger)

Configuration

1. Click the wireless icon in the top bar
2. Select "Open Internet Connect..."
3. Click "802.1X" in the top bar. If you don't see the 802.1X button, select "File: New 802.1X Connection"
4. Select "Configuration:" dropdown list
5. Select "Edit Configurations..."
6. Enter a name for the new configuration (i.e., CSU or CougarWave)
7. Select "Network Port:" dropdown list, and choose "AirPort"
8. * (Optional) Enter your Novell username in the "User Name:" field
9. Leave the "Password:" field empty
10. Select the "Wireless Network:" dropdown list, and choose "CougarWave"
11. In the "Authentication:" list, select "TTLS" (click the name so it is highlighted, not the checkbox) and click the "Configure..." button
12. Select the "TTLS Inner Authentication:" dropdown list, and choose "PAP"
13. You may leave the "Outer Identity:" field blank, or enter the word "anonymous"
14. Click the "OK" button
15. In the "Authentication:" list, uncheck all other items. Only "TTLS" should be checked
16. Click the "OK" button
17. Close the "Internet Connect" dialog box (click the red circle in the upper left hand corner of the box)

Connecting:

1. Click the wireless icon in the top bar
2. Select "CougarWave"
3. At the "Verify Certificate" dialog box, click the "Continue" button
4. * Enter your Novell username and/or password in the "802.1X Authentication" dialog box
5. Click the "OK" button
6. The wireless icon in the top bar should now be bold/darkened (was gray). This indicates a successful connection to CougarWave

Notes:

* If you choose not to enter your Novell username in step 8 in the "Configuration" section, you will be prompted to enter it upon selecting the CougarWave wireless network.

Disclaimer

Regarding Installation of Wireless Client Software on Personal Computers: CINS will modify, add or remove only software and/or hardware that CINS deems necessary to the successful installation and operation of the wireless software client. This includes, but is not limited to, the installation of relevant OS service packs and patches. CINS assumes no responsibility for any modifications made to the personal portable computer in the course of the wireless client installation that may adversely affect the operation of the personal portable computer. In addition, CINS assumes no responsibility for any software and/or hardware that did not function properly prior to the delivery of the personal portable computer to CINS for wireless client installation.

Procedure modification

CINS reserves the right to modify this document at any time as needed. The current version of this document will always be available on the CINS web site.